| Width | 59.9 mm (2.36 in) |
|---|---|
| Height | 56.0 mm (2.21 in) |
| Thickness | 7.0 mm (0.28 in) |
| Keyring hole | 5.3 mm (0.21 in) — split ring included, fitted before it ships |
| Personalisation | Name (up to 12 characters) |
| Material | PETG |
| Colours | Solid colour all the way through — not painted, not a sticker |
Soccer
Varsity Soccer Number Name Tag
Type the name. What you see turning is the geometry that gets printed — solid colour all the way through, made to order on our own machines.
How big it is
59.9 mm (2.36 in) across and 56 mm (2.21 in) tall, shown above next to a credit card (85.6 x 54 mm) at the same scale.
How thick it is
7 mm (0.28 in) thick — about 4 quarters stacked. It is a solid, layered object, not a flat tag.
How it goes on your keys
A 5.3 mm (0.21 in) hole is moulded into the top. A split ring is fitted through it before it ships, so it goes straight onto keys, a bag or a zip.
| Printer | Bambu Lab A1 0.4 nozzle |
|---|---|
| Material | PETG — tougher and less brittle than the usual PLA, and it takes a keyring without snapping |
| Layer height | 0.20 mm |
| Infill | 100% — solid, no hollow core |
| Per print bed | 14 at a time |
Each colour is a separate filament, changed by the printer as it goes, so the lettering and the outline are solid colour through their full depth. Nothing is glued, painted or stuck on.
| Made to order | Nothing is pre-made. Yours starts printing after you order. |
|---|---|
| Ships within | We confirm timing with your quote, before anything is made |
| Care | Wipe clean. Keep it out of a hot car for long stretches — PETG softens well above body heat but it is still plastic. |
| Wrong name? | Every keychain is cut for one person, so tell us before it prints and we will fix it. |